APREL Phantoms for SAR Testing

The APREL Phantoms have been developed as an engineering tool for both compliance and development. Our Phantoms are designed for the ALSAS 10U and can be integrated freely onto other SAR measurement systems. The unique design allows repeatable measurements for all devices, including handsets, PDA units, laptop computers, and validation dipoles. The APREL Phantoms have been fully validated both experimentally from 30MHz to 6GHz and numerically using Remcom XFDTD numerical software.

PRODUCTS

Systems

PHANTOMS

tel:+1.613.435.8300 | fax:+1.613.435.8306
303 Terry Fox Drive, Suite 102,
Kanata ON Canada K2K 3J1
Global Distributers

UNI Phantom

SAM/SAR and OTA

U-Med Phantom

Universal Flat Phantom

Simplified anthropometric canonical head, which combines left- and right test conditions in-one case study and allows for validation tests all in one phantom. Less than 8 litres of tissue stimulant need to fill up to the 15cm line. Used for SAR dosimetry, antenna efficiency design, compliance testing.
Fully compliant IEEE 1528, IEC 62-209, CENELEC EN-50361, ARIB and other global standards.
Solvent resistant, transparent body with marked reference grid for easy, repeatable device positioning.

Left and right SAM needs only6 litres of tissue stimulant to fill up to the 15cm line. Used for SAR, wireless product development, antenna design, compliance testing, near-field studies.
Fully compliant IEEE 1528, IEC 62-209, CENELEC EN-50361, ARIB and other global standards.
Solvent resistant shell with clearly visible, marked reference grid for easy and repeatable device positioning.

Medium Flat Phantom U-MED is used for SAR dosimetric evaluation.
Fully compliant IEEE 1528, IEC 62-209, CENELEC EN-50361, ARIB and other global standards.
Solvent resistant shell with clearly visible, marked reference grid for easy and repeatable device positioning.

Universal Flat Phantom is used for SAR dosimetric evaluation of base station antennas and larger transmitting devices.
L/W/H: 800mm x 500mm x 200mm.
Fully compliant IEEE 1528, IEC 62-209, CENELEC EN-50361, ARIB and other global standards.
Solvent resistant body with clearly visible, marked reference grid for easy and repeatable device positioning. Supplied with 800mm ergonomic support.